Shopping Cart Checkout Order Tracking

 
Alta U8300 Specifications

 

Printer friendly PDF
Alta U3401 Specifications

The Alta U8300 uses a medium format 8-megapixel Kodak Blue Plus sensor, ideal for applications requiring a large fi eld of view with a smaller pixel. The U8300C uses the color version of the CCD.

  • 3326 x 2504 array, 5.4 micron pixels
  • 5 MHz 12-bit and 1 MHz 16-bit digitization
  • 32Mbyte camera memory
  • USB 2.0 interface: no plug in cards or external controllers
  • Programmable, intelligent cooling to 50°C below ambient
  • Binning up to 8 Horizontal x 2504 Vertical
  • Subarray readout and fast sequencing modes
  • Precision time delayed integration (TDI) and kinetics mode readout
  • Programmable fan speed for low / zero vibration
  • Two serial port outputs for control of peripheral devices
  • General purpose programmable I/O port
  • External triggering and strobe controls
  • ActiveX drivers and MaxIm DL/CCD software included with every system
  • Field upgradeable fi rmware
  • Fused silica windows
  • Runs from single 12V supply with input voltage monitor
  • Compact enclosure
  • Programmable status indicators

MaxIm DL/CCD and CCDSoft software packages are offered at special prices when purchased at the same time as a camera system.

CCD Specifications
CCD
Kodak KAF-8300 or KAF-8300CE
Array Size (pixels)3326 x 2504
Pixel Size5.4 x 5.4 microns
Imaging Area18 x 13.5 mm (243 mm2)
Imaging Diagonal22.5 mm
Video Imager Size1.4"
Linear Full Well (typical)25.5K electrons
Dynamic Range76 dB
QE at 400 nm30%
Peak QE (580, 660 nm)67%
Anti-bloomingnone
Camera System Performance
PC InterfaceUSB 2.0
Max. Cable Length5 meters between hubs; 5 hubs maximum (max. total of 30m)
Digital Resolution16 bits at 1 MHz and 12 bits at 5 MHz
System Noise (typical)15 e- RMS at 1 MHz and 2 counts at 5 MHz
Pixel Binning1x1 to 8 x 2504 on-chip
Exposure Time30 milliseconds to 183 minutes (2.56 microsecond increments)
Image Sequencing1 to 65535 image sequences under software control
Frame SizesFull frame, subframe, focus mode
Cooling (typical)Thermoelectric cooler with forced air. Maximum cooling 50°C below ambient temperature
Dark Current (typical)0.1 e-/pixel/sec (-25°C)
Temperature Stability± 0.1°C
Camera Head SizeD02. Aluminum, hard blue anodized. 6" x 6" x 2.5" (15 x 15 x 6.35 cm) Weight: 3.1 lb. (1.4 kg) Low profile: D06. Wide Angle: D13. Deep Cooling: D09.
Mounting3.5" bolt circle. 2" 24 tpi thread. Optional Nikon F-mount or Canon FD mount.
Back Focal DistanceStandard: 1.025" (2.60cm). Low profile: 0.461" (1.171 cm). [optical]
Operating Environment-22° to 27°C. Relative humidity: 10 to 90% non-condensing.
Cable LengthStandard: 15 ft (4.5m)
Power40W maximum power with shutter open and cooling maximum. AC/DC "brick" supply with int'l AC input plug (100-240V, 50-60 Hz). Alternate 12V input from user's source.
ShutterStandard: Melles Griot 43mm. Low profile: no shutter.
Remote TriggeringLVTTL input allows exposure to start within 25 microseconds of rising edge of trigger

CCD Sensitivity

home | products | about | support | privacy policy | shop.ccd.com Copyright © Apogee Instruments Inc.
1020 Sundown Way, Suite 150, Roseville, California 95661
phone: 916-218-7450 fax: 916-218-7451 email: team@ccd.com