shop.ccd.com shopping cart checkout order tracking

 
Alta U3041 Specifications

 

Printer friendly PDF
Alta U3401 Specifications

The Alta U3041 uses a very large format 4-megapixel back-illuminated sensor, ideal for applications requiring large fi eld of view, such as sky surveys and radiology.

  • 2048 x 2048 array, 15 x 15 micron pixels
  • 16-bit digitization at 700 kHz; 12 bits at 2 MHz
  • 32 Mbyte camera memory
  • USB 2.0 interface: no plug in cards or external controllers
  • Programmable, intelligent cooling to 45C below ambient (D07 housing) / 60-65C below ambient (D09 housing)
  • Binning up to 8 Horizontal x 2048 Vertical
  • Subarray readout and fast sequencing modes
  • Programmable fan speed for low / zero vibration
  • Two serial port outputs for control of peripheral devices
  • General purpose programmable I/O port
  • External triggering and strobe controls
  • ActiveX drivers included with every system
  • Field upgradeable fi rmware
  • Fused silica windows
  • Runs from single 12V supply with input voltage monitor
  • Compact enclosure
  • Programmable status indicators

MaxIm DL/CCD and CCDSoft software packages are offered at special prices when purchased at the same time as a camera system.

CCD Specifications
CCD
Fairchild 3041
Array Size (pixels)2048 x 2048
Pixel Size15 x 15 microns
Imaging Area30.7 x 30.7 mm (944 mm2)
Imaging Diagonal43.4 mm
Video Imager Size2.7"
Linear Full Well (typical)100K electrons
Dynamic Range82 dB
QE at 400 nm74%
Peak QE (720 nm)96%
Camera System Performance
PC InterfaceUSB 2.0
Max. Cable Length5 meters between hubs; 5 hubs maximum (max. total of 30m)
Digital Resolution16 bits at 700 kHz; 12 bits at 2 MHz.
System Noise (typical)8 e- RMS (preliminary)
Pixel Binning1x1 to 8 x 2048 on-chip
Exposure Time30 milliseconds to 183 minutes (2.56 microsecond increments)
Image Sequencing1 to 65535 image sequences under software control
Frame SizesFull frame, subframe, focus mode
Cooling (typical)Thermoelectric cooler with forced air. Maximum cooling 45°C below ambient temperature (60-65°C below ambient with High Cooling D09 housing)
Dark Current (typical)1 e-/pixel/sec (-25° C); 0.15 eps for High Cooling D09 housing.
Temperature Stability± 0.1°C
Camera HeadD07. Low profile: D11. Aluminum, hard blue anodized. 7" x 7" x 2.55" (17.8 x 17.8 x 6.48 cm). Optional High Cooling housing: D09. 7" x 7" x 3.25" (17.8 x 17.8 x 8.9 cm). Weight: 4.2 lb. (1.9 kg)
MountingD07 or D09: 2.5" 20 tpi. D11: 2.7" thru. All: 5.125" bolt circle. Optional Nikon F-mount or Canon mount.
Back Focal DistanceStandard: 0.95" (2.41 cm). Low profile: 0.54" ( 1.37 cm). [optical]
Operating Environment-22° to 27°C. Relative humidity: 10 to 90% non-condensing.
Cable LengthStandard: 15 ft (4.5m)
Power40W maximum power with shutter open and cooling maximum. AC/DC "brick" supply with int'l AC input plug (100-240V, 50-60 Hz). Alternate 12V input from user's source.
ShutterMelles Griot 63mm (D07 and D09). D11 Low profile: no shutter.
Remote TriggeringLVTTL input allows exposure to start within 25 microseconds of rising edge of trigger

CCD Sensitivity

home | products | about | support | privacy policy | shop.ccd.com | contact us Copyright © Apogee Imaging Systems
151 Sunrise Ave. Suite 902, Roseville, California 95661
phone: 916-218-7450 fax: 916-218-7451