shop.ccd.com shopping cart checkout order tracking

 
Alta U1009 Specifications

 

Printer friendly PDF
Alta U1009 Specifications

The Alta U1009 has a back-illuminated full frame spectroscopy format CCD with exceptionally high quantum efficiency across the visible and in the UV. The 12 micron pixels provide high spectral resolution.

  • 1024 x 506 array, 12 x 12 micron pixels
  • 500 kHz 16-bit digitization
  • 32Mbyte camera memory
  • USB 2.0 interface: no plug in cards or external controllers
  • Programmable, intelligent cooling to 50-55C below ambient (D02 housing) / 65-70C below ambient (D09 housing)
  • Binning up to 8 Horizontal x up to 506 Vertical
  • Subarray readout and fast sequencing modes
  • Precision time delayed integration (TDI) and kinetics mode readout
  • Programmable fan speed for low / zero vibration
  • Two serial port outputs for control of peripheral devices
  • General purpose programmable I/O port
  • External triggering and strobe controls
  • ActiveX drivers included with every system
  • Field upgradeable fi rmware
  • Fused silica windows
  • Runs from single 12V supply with input voltage monitor
  • Compact enclosure
  • Programmable status indicators

MaxIm DL/CCD and CCDSoft software packages are offered at special prices when purchased at the same time as a camera system.

CCD Specifications
CCD
Hamamatsu S10140-1009
Array Size (pixels)1024 x 506
Pixel Size12 x 12 microns
Imaging Area12.3 x 6.1 mm (74.6 mm2)
Imaging Diagonal13.7 mm
Video Imager Size0.86"
Linear Full Well (typical)75K electrons
Dynamic Range81 dB
QE at 400 nm58%
Peak QE (600-650 nm)89%
Anti-bloomingnone
Camera System Performance
PC InterfaceUSB 2.0
Max. Cable Length5 meters between hubs; 5 hubs maximum (max. total of 30m)
Digital Resolution16 bits at 500 kHz
System Noise (typical)15 e- RMS at 500 kHz
Pixel Binning1x1 to 8 x 122 on-chip
Exposure Time30 milliseconds to 183 minutes (2.56 microsecond increments)
Image Sequencing1 to 65535 image sequences under software control
Frame SizesFull frame, subframe, focus mode
Cooling (typical)0.2 e-/pixel/sec (-30° C; D02 housing); 0.02 eps for High Cooling D09 housing.
Dark Current (typical)Standard D02: 0.5 e-/pixel/sec (-30°C). High Cooling D09: 0.05 eps (-50°C).
Temperature Stability± 0.1°C
Camera Head SizeStandard: D02. Low profile: D06. Wide angle: D13. Aluminum, hard blue and black anodized. 6" x 6" x 2.1" (15 x 15 x 6.25 cm). Weight: 3.1 lb. (1.4 kg). High cooling: D09. 17.8 x 17.8 x 8.9 cm. 1.9 kg.
Mounting2" 24 tpi; 3.5" bolt circle. D06: 1.77" thru; 3.5" B.C. D09: 2.5" 20 tpi; 5.125" B.C. D13: 3" 20 tpi; 5.125" B.C. Optional Nikon or Canon lens mount.
Back Focal DistanceStandard: 1.025" (2.60 cm). Low profile: 0.55" (1.40 cm). High Cooling: 1.36" (3.45 cm). Wide angle: 1.02" (2.59 cm). [optical]
Operating Environment-22° to 27°C. Relative humidity: 10 to 90% non-condensing.
Cable LengthStandard: 15 ft (4.5m)
Power40W maximum power with shutter open and cooling maximum. AC/DC "brick" supply with int'l AC input plug (100-240V, 50-60 Hz). Alternate 12V input from user's source.
ShutterStandard: Melles Griot 43mm. Low profile: no internal shutter. High cooling & Wide Angle: Melles Griot 63mm.
Remote TriggeringLVTTL input allows exposure to start within 25 microseconds of rising edge of trigger

CCD Sensitivity

home | products | about | support | privacy policy | shop.ccd.com | contact us Copyright © Apogee Imaging Systems
151 Sunrise Ave. Suite 902, Roseville, California 95661
phone: 916-218-7450 fax: 916-218-7451